Tether Use
1 - To use, remove Tether by loosening strap and
unclipping from storage anchor.
2 - To extend Tether for use, tilt Tether Adjuster
and pull to lengthen.
3 - To store, attach Tether to storage anchor and
remove slack in strap by pulling on free end of
strap. Loose strap should be stored in provided
tether cover. When not in use, Tether MUST be
properly stored.
WARNING: ALWAYS USE TETHER for
forward facing installation if vehicle is equipped
with a Tether Anchor point and vehicle
requirements are met (see vehicle owner's
manual). NEVER USE IN REAR FACING
INSTALLATION.
1
2
3
36 RAVA instructions 37RAVA instructions
To Next Page
Loading...
