Nustep T6 - EMC Tables

28
EMC Tables
Table 1 from EN 60601-1-2:2007
Guidance and manufacturer’s declaration – electromagnetic emissions
The NuStep model T6 is intended for use in the electromagnetic environment specied below. The customer or
the user of the NuStep model T6 should assure that it is used in such an environment.
Emissions test Compliance Electromagnetic environment – guidance
RF emissions
CISPR 11
Group 1 The NuStep model T6 uses RF energy only for its internal
function. Therefore, its RF emissions are very low and are
not likely to cause any interference in nearby electronic
equipment.
RF emissions
CISPR 11
Class B The NuStep model T6 is suitable for use in all
establishments.
Harmonic emissions
IEC 61000-3-2
Not applicable
Voltage uctuations/
icker emissions
IEC 61000-3-3
Not applicable