Copyright
Océ-Technologies B.V. Venlo, The Netherlands © 1999
All rights reserved. No part of this work may be reproduced, copied, adapted,
or transmitted in any form or by any means without written permission from
Océ.
Océ-Technologies B.V. makes no representation or warranties with respect to
the contents hereof and specifically disclaims any implied warranties of
merchantability or fitness for any particular purpose.
Further, Océ-Technologies B.V. reserves the right to revise this publication and
to make changes from time to time in the content hereof without obligation to
notify any person of such revision or changes.
Code number 7055817
Edition 3.1
Océ-Technologies B.V.
GB
This manual, which can be kept behind the left-hand door of the copier,
contains a description of the Océ 7050/7051 and the copying that can be done
with it. The introduction (chapter 1) contains a general description of the
working methods for using the copier and it is recommended that you read at
least this chapter.
Overview of copier parts on the covers
To assist you in finding parts of the copier and the functions on the operating
panel quickly, an illustration of the Océ 7050/7051 is presented on the inside
front cover and of the operating panel on the inside back cover, both of which
can be folded out.
Safety information
This manual contains the following safety information:
■
Appendix B lists ‘Instructions for safe use’.
You are advised to read this
information before you start to actually use the copier.
Technical safety
information such as safety data sheets can also be found in appendix B.
■
Where applicable, cautions and warnings are used throughout this manual to
draw your attention to safety precautions to be taken.
To Next Page
Loading...
