Oce 7050 - Page 51

Safety information 51
■
Do not place the copier in rooms which are subject to excessive vibration.
■
Do not place the copier in rooms which are too small and insufficiently
ventilated. See the Océ 7050/7051 safety data sheet in this appendix for
information about space and ventilation requirements.
■
Always use materials recommended by Océ and developed for this Océ
copier. Materials not approved by Océ may result in faults in your copier.
■
Do not use the copier when it is emitting unusual sounds. Remove the plug
from the power socket and contact Océ Customer Service.
■
To avoid temporary visual inconvenience, do not look directly into the light;
if possible, close the cover before starting a copy job.