9
2. SAFETY INSTRUCTIONS
2.1.5. Before connecting
Make sure that the voltage of your amplifier matches your local supply voltage.
2.1.6. Grounding
This amplifier is a protection class 2 device (without an earth conductor), while the power supply is
class 1. As a result, a three-pin power cable with a protective ground contact must be used (includ-
ed in the scope of delivery).
2.2. Placement
2.2.1. Location
OCTAVE equipment is designed strictly for use in a dry domestic environment. Do not use it in
open air or in damp environments!
Never place plants or liquid-filled containers on your amplifier. Take care that objects do not
fall or liquids are not spilled into the enclosure. Should this happen, disconnect the mains plug
immediately and have your amplifier checked by a qualified service technician.
Condensation may form if the amplifier is taken from a cold environment into a warm one. In
this case, wait until the amplifier has reached room temperature and is dry before switching it
on.
Avoid installing the amplifier close to sources of heat, such as heaters, or anywhere that it may
be in direct sunlight.
Do not operate your OCTAVE amplifier near flammable materials, gases, or vapors. Avoid
areas where there may be heavy accumulations of dust or where the amplifier may be subject
to mechanical vibration.
Place your OCTAVE amplifier on a stable, even surface.
2.2.2. Cover
Never operate the amplifier without the cover.
2.2.3. Ventilation
Ensure sufficient air circulation around your amplifier. If you intend to install your equipment in
a cupboard or a shelf unit, ensure that there is at least a 10 centimeter gap between the venti-
lation slots and the walls all around the amplifier.
To prevent heat accumulation, the back of the cupboard should have ventilation holes.
Do not rest the equipment on a soft surface such as carpet or foam sheeting.
2.3. Warranty
OCTAVE can only guarantee the safety, reliability and performance of this unit if modifications and
repairs are carried out by specialized personnel and if the amplifier is operated in accordance with
the instructions contained in this manual.
To Next Page
Loading...
Need help?
General
