Power switch
0 = off; 1 = on. Soft-start LED illuminates during start-up period
Input selector
This is used to select the desired input signal. A green LED illuminates in
the window to show which input you have selected.
Phono Line level or phono input (if phono has been selected as an
option)
CD1 XLR line level input for CD, SACD and similar
CD2 RCA line level input for CD, SACD and similar
Aux RCA line level input for video, etc.
Tuner RCA line level input for tuner, etc.
(Recommended settings, see Chapter 6.1 - 6.5)
Secondary input
selector
Source Playback of inputs selected with
Tape Playback of Tape or Tape/Monitor, when a recording
is being made of the source selected with (see Chap. 6.6.)
Front Ch. Multichannel bypass mode. Tape and inputs selected with
are switched off. In this mode, the V 80 SE functions as a two-
channel power amplifier.
The volume control is bypassed. (See Chapter 6.7)
To Next Page
Loading...
Need help?
General
