12 Practical Guide for operating the C-Quant
Instruction Manual C-Quant ( G/80000/1007/en) 43 / 56
Example 3b: esd > 0.12 in “G” range
This example is similar to Example 3a: if there is no time to repeat the measurement,
the outcome of this measurement can be used to estimate an upper limit for the
straylight value.
If you decide to repeat the measurement, the surplus of 1 responses would suggest
choosing a lower "Range" setting (as in Example 6), but the presence of some erro-
neous points (blue points at 2.0, 2.3 and 3.3) indicates that this patient has difficul-
ties to perform the test.
Note that the same "Range" setting (“G”) is the easiest for the patient.
To Next Page
Loading...