6.DRIVE TRAIN
6-
CAUTION
Inflate the tire to seat the tire bead.
Check the rim line cast on the tire side walls. It
must be equidistant from the wheel rim all the way
around. If the distance between the rim line and
the wheel rim varies this indicates that the bead is
not properly seated. If this is so, deflate the tire
completely, and unseat the tire bead on bosh
sides. Then coat the bead with clean water and
re-seat the tire.
Adjust the tire pressure to specification.
When installing each tire, make sure the
arrow on the tire points in the direction of
rotation. Also make sure the outer side of the
wheel rim is facing outward.
To Next Page
Loading...
