8. BRAKES SYSTEM
8-
Lower Suspension Arm
Inspect the suspension arm and for
damage or distortion. If any damages or
distortion are found, replace the
suspension arm with a new one.
Move suspension arm from side to side.
There should be no noticeable loose.
Replace bushing if necessary.
Move suspension arm up and down.
There should be no noticeable loose.
Replace bushing if necessary.
Upper Suspension Arm
Inspect the suspension arm and for
damage or distortion. If any damages or
distortion are found, replace the
suspension arm with a new one.
Move suspension arm from side to side.
There should be no noticeable loose.
Replace bushing if necessary.
Move suspension arm up and down.
There should be no noticeable loose.
Replace bushing if necessary.
REASSEMBLY
Reassemble and remount the rear
suspension in the reverse order of
removal and disassembly.
Pay attention to lubricate rear knuckles
with lithium-soap based grease.