Why does the battery fail to charge fully on OHAUS EB30 Scales?
If the battery in your OHAUS Scales fails to charge fully, it may be defective or past its useful life. Replace the battery through an authorized service dealer.
What to do if OHAUS EB30 Scales does not respond to front panel controls?
If the OHAUS Scales does not respond to front panel controls, the Membrane Switch might be defective. Test the Membrane Switch as described in Section 3.2 and replace it if necessary. Alternatively, the Main PC Board could be defective. Test the Main PC Board as described in Section 3.4, and if defective, replace it.
How to troubleshoot OHAUS EB30 Scales that will not turn on using battery power?
If your OHAUS Scales will not turn on using battery power, the battery may be discharged or defective, so test the battery as described in Section 3.5 and replace it if needed. Another possible cause is a defective wiring harness or broken battery clip connection; open the scale and check the voltage at the battery contacts first. A defective Membrane Switch could also be the reason, so test and replace it as per Section 3.2 if necessary. Lastly, the Main PC Board might be defective; test it according to Section 3.4 and replace if defective.
Concise overview of the EB Series weighing scale's purpose and design.
Details key capabilities like capacity, resolution, display, and application modes.
Essential guidelines for safe and dependable operation of the scale.
Steps to unpack the scale and verify included components.
Instructions for attaching the weighing platform and securing protective elements.
Guidance on choosing an optimal environment for scale operation.
Procedure to ensure the scale is properly leveled using the indicator.
Details on connecting the scale to AC power and managing battery charging.
Instructions for performing the initial span calibration for accurate measurements.
Explanation of icons and indicators shown on the scale's LCD display.
Description of the scale's buttons and their respective operations.
Procedure for powering the scale on and off, including warm-up time.
How to set and clear a tare value for weighing containers.
How to zero the scale's display before weighing.
Procedure to cycle through available units like kg, g, lb, oz.
Using the scale for limit checking, counting items, and percentage weighing.
Steps to sample items and calculate the average piece weight for counting.
How to view Piece Count, APW, and Total Weight in counting mode.
Procedure to add weighed items or counts to memory.
How to perform weighing as a percentage of a reference weight.
Configures the displayed scale increment (readability or graduation).
Sets the activation mode for the display backlight.
Defines the range for maintaining the zero reading.
Adjusts the level for stabilization time and stability indication.
Step-by-step guide to calibrate the scale using specified weights.
Table of common issues, their causes, and suggested solutions.
Detailed specifications including capacity, resolution, construction, and dimensions.
Details Ohaus's warranty policy, limitations, and contact information.
General| Capacity | 30 kg |
|---|---|
| Readability | 0.01 kg |
| Display | LCD |
| Calibration | External Calibration |
| Units of Measurement | kg, g, lb, oz |
| Tare Range | Full Capacity |
| Power Supply | AC Adapter |
| Material | Stainless steel |
| Interface | RS232 |
To Next Page
