OHAUS Explorer EX125 User Manual (English)

Other manuals for OHAUS Explorer EX125

Questions and Answers:

J
John MurphyAug 13, 2025
How to fix 'Cannot calibrate' error on OHAUS Scales?
- W
  Wesley BassAug 14, 2025
  If the OHAUS Scales display 'Cannot calibrate', first ensure that the Calibration Menu is not locked; if it is, turn the Calibration menu lock off. Also, check if LFT is turned on; if so, turn LFT off. An unstable environment can also prevent calibration, so move the balance to a more suitable location. Finally, verify that you are using the correct calibration masses; if not, use the correct ones.
S
shieldsmaryAug 17, 2025
Why OHAUS Explorer EX125 Scales will not turn on?
- R
  rogersjasonAug 17, 2025
  If your OHAUS Scales are not turning on, it could be due to a lack of power. Verify the connection and voltage to ensure the balance is receiving power.
D
Diane BerryAug 21, 2025
How to resolve 'Invalid Piece Weight' error on OHAUS Explorer EX125?
- B
  Brenda SandersAug 21, 2025
  If your OHAUS Scales display 'Invalid Piece Weight', it means the average piece weight is too small. To resolve this, increase the average piece weight.
O
Olivia SmithAug 26, 2025
What to do if OHAUS Explorer EX125 show 'Operation Timeout'?
- S
  Scott RyanAug 26, 2025
  If your OHAUS Scales display 'Operation Timeout', it means the weight reading is not stable. To resolve this, move the balance to a more suitable and stable location.
K
Kristin ThomasAug 28, 2025
Why are my OHAUS Scales showing poor accuracy?
- M
  Michael HammondAug 29, 2025
  If your OHAUS Scales are showing 'Poor accuracy', it could be due to improper calibration. In this case, perform a calibration. Alternatively, an unstable environment may be the cause; move the balance to a more suitable location.
R
Ricky SchwartzSep 1, 2025
What to do if I cannot change menu settings on OHAUS Explorer EX125 Scales?
- N
  Nicholas WheelerSep 2, 2025
  If your OHAUS Scales display 'Cannot change menu settings', it could be because the sub-menu is locked. Unlock the sub-menu to regain access to the settings. Another possibility is that LFT is set to on; in this case, turn LFT off.
H
hurstbrittanySep 5, 2025
What does 'Low Reference weight' mean on OHAUS Explorer EX125 Scales?
- C
  churstSep 5, 2025
  If the OHAUS Scales display 'Low Reference weight', this indicates that the reference weight is too small. Increase the sample size to resolve this issue.
A
Angela MaynardSep 9, 2025
What to do if OHAUS Explorer EX125 Scales display 'Busy (tare, zero, printing)'?
- D
  David LeonardSep 9, 2025
  If the OHAUS Scales display 'Busy (tare, zero, printing)', wait until the current operation is completed.

OHAUS Explorer EX125 Specifications

General

Capacity	120 g
Calibration	Automatic internal calibration
Power Supply	100-240 VAC, 50/60 Hz
Readability	0.01 mg
Repeatability (Std. Dev.)	0.1 mg
Linearity	±0.2 mg
Stabilization Time	3 seconds
Display	Backlit LCD
Communication	USB, RS232
Weighing Units	g, kg, lb, oz
Power	AC Adapter (Included)
Operating Temperature	10 °C to 30 °C
Pan Size	90 mm (3.5") diameter