OHAUS Scout pro Faq

5 pages

To Next Page

Scout Pro FAQ

AppNotes.v20170811_ AG

For any further questions, please e-mail us at techsupport@ohaus.com, or call us at 973-377-9000 #2 or ext. 7852 from 8AM to 5PM EST

Topic:

This list compiles frequently asked questions about the Scout Pro:

a) How do I turn on the units of measure

b) How do I switch between units of measure

c) How do I calibrate my unit

How to Turn On Units of Measure

Enabling or disabling the units of measure can be accomplished in the UNITS menu.

You can also click here for the user manual -- refer to Section 3: Operations, pages EN-11 (navigating the

main menu) and EN-13 (entering the UNIT menu).

Note1: during MENU navigation, use the following

buttons to initiate selections YES or NO.

Note2: depending on the region,the [ON/ZERO

Off] button may be designated as [ON/ 0/T Off].

1. With the scale (and lock switch) OFF: press

and hold [ON/ZERO Off] (approx. 5 seconds)

until the scale flashes MENU.

2. Release the button once MENU is displayed

After releasing the button, the scale will

display CAL.

3. Press [PRINT Unit] repeatedly until UNIT is

displayed.

4. Once UNIT is displayed, press [ON/ZERO Off]

to select this menu.

YES

. . .

Other manuals for OHAUS Scout pro

General