OHAUS SJX1502N/E - Unit Menu

SCOUT
TM
SJX SERIES BALANCES EN-13
Check [CHECk]
Set the status.
OFF = disabled
ON = enabled
Totalization [totAL]
Set the status.
OFF = disabled
ON = enabled
Density [SPEC.Gr]
Set the status.
OFF = disabled
ON = enabled
Hold [Hold]
Set the sub-mode.
OFF = disabled
Peak Hold = allows the user to capture and store the highest stable weight value
(>=5d).
Display Hold = allows the user to capture and store the first stable weight value (>=5d).
When the stable value is being held on the display, the “Hold” icon will blink and the displayed
weight will not change.
Advance to the next menu or return to the top of the current menu.
End Mode [End]
4.5 Unit Menu
This menu activates units so they will be accessible with the Units button. The units in the menu
must be turned “on” to be active.
Note: Available units vary by model and local regulations.
g: off, on
kg: off, on
ct: off, on
oz: off, on
ozt: off, on
dwt: off, on
lb: off, on
grn: off, on
hkt: off, on
sgt: off, on
twt: off, on
t: off, tola, tical
End Unit: Exit menu