35
Chapter 9
| Settings | Admin Menu
9
Settings
Clear Test Records will keep the people list, but will delete all test information. This would be
helpful if only the current year's tests are required to be on board.
Clear Operators will remove all operators listed in the unit.
Clear Custom Parameters will remove any parameters that have been manually added to the
database.
Restore System Defaults will change all operational settings to the settings that were
originally implemented on the instrument. This option will not erase any of the information
listed above.
Reset to Factory Settings will remove all data on the Quantifit2 and it will operate as though it
is the very first time the unit is powered up.
Update Software
o Occasionally there will be updates to the on-board software.
o OHD will notify customers when an update is available, if the unit has been
registered.
o The notification will come via email.
o The update can be downloaded from a website and saved to a USB Drive.
o With the USB Drive in any port on the back of the instrument, the Update Software button
will ask the operator to select the update file.
o After the update, the instrument will automatically cycle power at the appropriate time,
reboot the system, and be ready for testing.
To Next Page
Loading...