64
Chapter 22
| Terms & Conditions | Standard Terms and Conditions
22
Terms & Conditions
you must first contact OHD technical
support department at +1 205-980-
0180. You will be required to provide
us with the serial number for your
instrument as well as a valid reason for
breaking the Quality Seal. You should
break this seal only after you have
received factory authorization. Do not
break the Quality Seal before you have
contacted us! Following these steps
will help ensure that you will retain the
original warranty on your instrument
without interruption.
WARNING Unauthorized user
modifications or application beyond
the published specifications may result
in electrical shock hazards or improper
operation. OHD will not be
responsible for any injuries sustained
due to unauthorized equipment
modifications.
© Copyright OHD agrees to a limited
copyright release that allows you to
reproduce manuals and other printed
materials for use in service training
programs and other technical
publications. If you would like other
reproductions or distributions, submit
a written request to OHD.
Unpacking and Inspection Follow
standard receiving practices upon
receipt of the instrument. Check the
shipping carton for damage. If
damage is found, stop unpacking the
instrument. Notify the carrier and ask
for an agent to be present while the
instrument is unpacked. There are no
special unpacking instructions, but be
careful not to damage the instrument
when unpacking it. Inspect the
instrument for physical damage such
as bent or broken parts, dents, or
scratches.
All written requests must be submitted to
the contact information as follows:
OHD, LLLP
2687 John Hawkins Parkway
Hoover, Alabama 35244
+1 205-980-0180
+1 205-980-5764 FAX
sales@ohdglobal.com
www.ohdglobal.com
To Next Page
Loading...