Getting started > 10
2. Top Cover: open and close for access, for example when changing
a ribbon cartridge. Keep closed for noise reduction.
3. Control Panel: contains button switches and indicators (described
in detail later) that allow you to operate the printer.
4. Power Switch: to turn the printer power ON/OFF.
5. Platen Knob: turn to move or eject the paper.
6. Paper Tray: to hold cut sheet paper for use by the printer (one
sheet at a time).
7. Paper Guide: can be adjusted as required to locate the left edge
of cut sheet paper.
8. Paper Type Lever: set according to the type of paper used - cut
sheet or continuous forms.
9. Paper Thickness Lever: set according to the thickness of the pa-
per. There is also a setting to facilitate ribbon replacement.
10. Ribbon Cartridge: holds the printer ribbon.
To Next Page
Loading...
