Oki 6300FB - Loading Continuous Forms

Paper handling > 20
NOTE
Ensure that the paper is accurately aligned along the Paper Guide to
avoid the possibility of skew printing.
When printing an envelope, do not fold up the flap. A flap aligned along
the Paper Guide can lead to skew printing.
Ejecting cut sheet paper
When the printer reaches the end of the cut sheet page it automatically
ejects the page. If required, add another sheet for the printer to continue
printing from where it left off.
To eject a cut sheet left in the printer, carry out the following:
1. Press the SEL button to put the printer off-line.
2. Press the PARK button and the paper is ejected to the Paper Tray.
NOTE
Paper longer than A4 length (297 mm) may overlap and possibly fall
off the Paper Tray.
Loading continuous forms
Setting up continuous forms
To avoid paper feeding problems, carry out the following:
1. Check your printer is on a surface approximately 75 cm above the
floor.
>=60 cm
75 cm
<=3 cm