Paper handling > 24
Tearing off continuous forms
1. With the SEL indicator illuminated, press the TEAR button to eject
the continuous forms onto the Paper Tray.
2. Carefully tear off the forms along the tear-off perforations in the
direction shown. Using excessive force may result in tearing at a
position other than the tear-off perforations.
3. Press the TEAR button, FF/LOAD button or LF button to reposition
the continuous forms in the printer back to the first line print posi-
tion.
Aligning the tear-off perforations
If the tear-off perforations are not aligned with the paper cutter on the Top
Cover, align them as follows:
1. With the SEL indicator illuminated, press and hold the TEAR but-
ton to move the tear-off perforations to the paper cutter on the Top
Cover.
To Next Page
Loading...
