Operating instructions > 32
Setting menu values
The following information explains the printer settings and how you can
change them. Printer items and their values are printed for reference.
Confirming current settings
To print the current menu settings, use a cut sheet of A4 paper or con-
tinuous forms of width at least 254 mm. In this example, a sheet of A4
paper is used.
1. Set the Paper Type lever to cut sheet mode.
2. Carry out one of the following:
(a) If the printer power is OFF, while holding down the SEL
button set the printer Power Switch to ON.
(b) If the printer power is ON, press the SHIFT and SEL but
-
tons together.
3. Place the cut sheet on the Paper Tray. The cut sheet is taken into
the printer automatically and the printer prompts you to request a
menu settings print.
4. Press the PARK button and the printer prints out all the menu
items currently selected and their corresponding settings.
5. Exit or proceed to change menu settings:
(a) To exit menu settings confirmation, save the current set
-
tings and eject the paper, press the SHIFT and SEL but-
tons together.
(b) To change menu settings, see
"Menu setting" on page 33.
To Next Page
Loading...
