Operating instructions > 33
Menu setting
NOTE
Before changing menu settings, you may wish to print the current
menu settings as in "Confirming current settings" on page 32.
Set menu item values (printed out for reference as you proceed) as fol-
lows:
1. Press LF (or SHIFT and LF together) to step forward (backward)
through the menu items to the required item.
2. To change the setting for a selected item, press FF/LOAD (or
SHIFT and FF/LOAD together) to step forward (backward) through
the setting values to the required setting.
3. Repeat steps 1 and 2 as required to change settings for other items.
4. To exit menu setting, press SHIFT and SEL together to save the
new settings and exit menu setting mode.
NOTE
Switching the printer OFF does not save the new settings.
Menu items and settings
In the menu settings tables below, factory default settings are shown
emboldened.
ITEM FUNCTION SETTING
Emulation Mode Select EPSON LQ mode,
IBM PPR mode, or IBM X24
AGM mode.
IBM PPR
IBM AGM
EPSON LQ
Print Mode Select quality of ANK
characters.
LQ Courier
LQ Roman
LQ Swiss
LQ Swiss Bold
LQ Orator
LQ Gothic
LQ Prestige
LQ OCR-A
LQ OCR-B
Utility
HSD
To Next Page
Loading...
