Paper handling > 19
4. Set the left margin of the paper by adjusting the Paper Guide (1)
along the scale (2) relative to the start of printed line marker arrow
(3).
5. Adjust the Paper Thickness Lever (4) to suit the paper. See "Set-
ting the Paper Thickness lever" on page 26.
NOTE
If the Paper Thickness Lever setting does not match the paper being
used, paper feeding and printing may not work properly.
6. With the printing side upwards and the left edge aligned with the
Paper Guide (1), carefully insert the paper on the Paper Tray (2)
into the printer until it is gripped.
To Next Page
Loading...
