6.6 Cleaning the Printer 127
Cleaning the Feed Roll
When feeding cannot be done, follow the procedure below to wipe the feed roll gently with
a well-wrung soft cloth.
There are feed rolls in the interior of this printer (two locations, total of four), tray module
(one location) and paper tray (one location).
The following procedure explains how to clean the feed roll set in the paper tray. Follow this
procedure also when cleaning the feed rolls inside of the printer and the tray module.
Note
• The feed roll is a regular replacement part.
Feed roll
Inside of machine (two locations) Tray module (one location) Paper tray (one location)
Open cover A and after removing
the drum/toner cartridge, clean the
feed roll.
Even without uninstalling the
tray module, you can clean the
feed roll after pulling out the
paper tray.
Pull out the paper tray and
clean the feed roll.
To Next Page
Loading...
Need help?
General
