Using adminmanager standard setup > 37
Maintenance Tab (Oki Device Setup)
ITEM COMMENTS
LAN Scale Select NORMAL (the default) or SMALL.
IP Filter Setup… The following items can be configured:
Use IP FIlter Enable/disable IP Filtering. Default is
disabled.
Admin IP
Address
Enter the printer’s IP Address.
IP Address
Range
Set up to 10 IP Filter address ranges:
[IP FIlter Range 1] through [IIP Filter
Range 10].
Printing Enable/disable printing of the
specified IP address range. Default is
disabled.
Configuration Enable/disable changing IP address
ranges. Default is disabled.