Oki C 9650n Network And Configuration Guide

Installing a network printer > 59
I NSTALLING A NETWORK PRINTER
There are two ways to set up a network printer:
1. Using the Oki Driver Installer program
2. Install it yourself using Add Printer Wizard (Windows)
U SING THE OKI DRIVER INSTALLER
The Oki driver installer program searches for compatible printers
on the network and installs and configures the printer drivers
with the correct port settings automatically.
Using the Oki driver installer program, you can install to the
following connected printer types:
1. Locally connected printers
> USB port
> Parallel port
2. Networked printers
> Directly connected (i.e. Peer-to-peer) printers via TCP/
IP
The Microsoft Standard TCP/IP is installed and configured
to use Port 9100 with the printer’s IP address.
> Printers not directly connected, but shared via a PC
(i.e. Client-Server)
Choose between Windows shares or Netware will only be
shown if netware printer detected).
W HY USE THE OKI DRIVER INSTALLER ?
> Discovers printers on the network (TCP/IP)
> Installs driver and correctly assigns appropriate port/IP
address
> Allows easy configuration of sharing the printer with other
network users
> Automatically configures the printer drivers with the
appropriate hardware device options such as hard disk
drive, duplex unit (via Oki Network Extension software)

Oki C 9650n Specifications

General

Brand	Oki
Model	C 9650n
Category	Printer
Language	English