Using adminmanager standard setup > 23
I
NSTALLING
A
DMIN
M
ANAGER
1. Insert the Network & Utilities CD into the CD-ROM drive
and wait for it to autorun.
If the installer does not start automatically, click Start >
Run and enter E:\Setup (where E is your CD-ROM drive)
in the Open field, then click OK.
2. Select the appropriate language.
3. Accept the Software License Agreement if you have not
previously accepted it.
4. Select the Optional Utilities tab.
5. Then select Install Admin Manager.
6. If required, select the appropriate language.
To Next Page
Loading...
Need help?
General
