Operator panel > 29
STSTEM
ADJUST
(cont.)
SLEEP TIME 1 MIN
2 MIN
3 MIN
4 MIN
5 MIN
10 MIN
15 MIN
30 MIN
60 MIN
Adjusts the power saving time before the
printer automatically switches into sleep mode.
AUT PW OFF TOME 1 HOURS
2 HOURS
3 HOURS
4 HOURS
8 HOURS
12 HOURS
18 HOURS
24 HOURS
Sets the time to switch from idle state to Off
mode.
SILENT MODE ON
OFF
Specifies a print preparation operation when
entering standby status from Sleep mode.
ON : It is quiet as there is no print preparation.
OFF : There is a rotation noise of the image to
perform print preparation but you can start
first printing early.
ECO MODE ON
OFF
ON : Printing starts even before the
temperature of the fuser reaches the
prescribed degrees, if the job is small.
OFF : Printing starts after the temperature of
the fuser reaches the prescribed degrees.
CLRABLE WARINING ONLINE
JOB
When ONLINE, non-critical warnings, such as
requests for a different paper size, can be
cleared by pressing the ON LINE button. When
set to JOB, they are cleared when the print job
resumes.
AUTO CONTINUE ON
OFF
Determines whether or not the printer will
automatically recover from a memory overflow
condition.
MANUAL TIMEOUT OFF
30 SEC
60 SEC
Specifies how many seconds the printer will
wait for paper to be fed before cancelling the
job.
ITEM SETTINGS EXPLANATION
To Next Page
Loading...
Need help?
General
