Oki c332 User Manual

Operator panel > 36
USB S ETUP
This menu controls the operation of the printer’s USB data interface.
P RINT S ETUP
This menu provides adjustment of various print job related functions.
HUB LINK SETTING AUTO NEGOTIATE
100BASE-TX FULL
100BASE-TX HALF
10BASE-T FULL
10BASE-T HALF
Sets full or half duplex for communication via a network
hub.
When AUTO is set, negotiation is done automatically.
FACTORY DEFAULTS EXECUTE Reloads the settings present when the unit was setup
by the manufacturer.
ITEM SETTINGS EXPLANATION
USB ENABLE
DISABLE
Sets USB I/F Enable/Disable.
SPEED 480 Mbps
12 Mbps
Selects the USB interface speed.
SOFT RESET ENABLE
DISABLE
Enables or disables the SOFT RESET command.
SERIAL NUMBER ENABLE
DISABLE
Specifies whether to ENABLE or DISABLE a USB serial
number.
The USB serial number is used to identify the USB
device connected to your PC.
OFFLINE RECEIVE ENABLE
DISABLE
Enables or disables this function. When set to Enable,
the interface retains a receive possible state even when
switching to Offline. Interface sends the BUSY signal
only when the receive buffer is full or a service call
occurs.
CONNECTED HOST NORMAL
SPECIFIC
ITEM SETTINGS EXPLANATION
PERSONALITY AUTO
EMULATION
PCL
XPS
IBM PPR III XL
EPSON FX
PS3 EMULATION
Selects a printer language.
COPIES 1
~
999
Enter the number of copies of a document to be
printed from 1 to 999.
DUPLEX ON
OFF
Switches the Duplex (2 sided) function ON/OFF.
ITEM SETTINGS EXPLANATION

Oki c332 Specifications

General

Print Technology	LED
Monthly Duty Cycle	45, 000 pages
Standard Input Capacity	250 sheets
Maximum Input Capacity	880 sheets
Operating Systems Supported	Windows, Mac OS, Linux
Weight	22 kg
Interface	USB 2.0, Ethernet