Operator panel > 48
P
RINT
STATISTICS
This menu should only be changed by the System Administrators. In order to gain access
to this menu, follow the instructions in “How to change the settings - administrator” on
page 21, but hold down the Menu button instead of the OK button. In this case, the default
password is 0000.
This menu is in ENGLISH only.
ITEM SETTINGS EXPLANATION
ENTER PASSWORD nnnn Enters a password to enter Print Statistics
menu.
The default password is “0000.”
“Print Statistics” category is not shown when
Print Statistics function is not supported.
USAGE REPORT ENABLE/
DISABLE
Enables/Disables the printing of the Usage
Report.
When changing a setting value, the printer is
rebooted.
MAINTENANCE CNT ENABLE/
DISABLE
Indication of frequency of consumable
exchange/non indication is set.
When Enable is set, also the maintenance
counter is indicated in together.
Conditions for display:
Enable must be selected in Print Statistics
> Usage Report.
RST MAIN CNT EXECUTE Resets the main counter.
RST SUPPLIES CNT EXECUTE Resets the number of replacement of
consumables.
CHANGE
PASSWORD
NEW PASSWORD **** Sets a new password to enter Print
Statistics menu.
VERIFY
PASSWORD
**** Verifies the change
To Next Page
Loading...
Need help?
General
