Oki c332 User Manual

Operator panel > 31
PRINT
ADJUST
POSITION
ADJUST
MP
TRAY
X
ADJUST
+2.00MILLIMETER
~
0.00MILLIMETER
~
-2.00MILLIMETER
Adjusts the position of a whole print image in
the direction perpendicular to the direction the
paper runs, that is horizontally, in 0.25 mm
increments.
Any parts of the print image that are outside
the printable area as a result of this shift will
be cropped.
Y
ADJUST
+2.00MILLIMETER
~
0.00MILLIMETER
~
-2.00MILLIMETER
Adjusts the position of a whole print image in
the direction the paper runs, that is vertically,
in 0.25 mm increments.
Any parts of the print image that are outside
the printable area as a result of this shift will
be cropped.
DUPLEX
X
ADJUST
+2.00MILLIMETER
~
0.00MILLIMETER
~
-2.00MILLIMETER
Adjusts the position of a whole print image in
the direction perpendicular to the direction the
paper runs, that is horizontally, in 0.25 mm
increments.
Any parts of the print image that are outside
the printable area as a result of this shift will
be cropped.
DUPLEX
Y
ADJUST
+2.00MILLIMETER
~
0.00MILLIMETER
~
-2.00MILLIMETER
Adjusts the position of a whole print image in
the direction the paper runs, that is vertically,
in 0.25 mm increments.
Any parts of the print image that are outside
the printable area as a result of this shift will
be cropped.
TRAY1 X
ADJUST
+2.00MILLIMETER
~
0.00MILLIMETER
~
-2.00MILLIMETER
Adjusts the position of a whole print image in
the direction perpendicular to the direction the
paper runs, that is horizontally, in 0.25 mm
increments.
Any parts of the print image that are outside
the printable area as a result of this shift will
be cropped.
Y
ADJUST
+2.00MILLIMETER
~
0.00MILLIMETER
~
-2.00MILLIMETER
Adjusts the position of a whole print image in
the direction the paper runs, that is vertically,
in 0.25 mm increments.
Any parts of the print image that are outside
the printable area as a result of this shift will
be cropped.
DUPLEX
X
ADJUST
+2.00MILLIMETER
~
0.00MILLIMETER
~
-2.00MILLIMETER
Adjusts the position of a whole print image in
the direction perpendicular to the direction the
paper runs, that is horizontally, in 0.25 mm
increments.
Any parts of the print image that are outside
the printable area as a result of this shift will
be cropped.
DUPLEX
Y
ADJUST
+2.00MILLIMETER
~
0.00MILLIMETER
~
-2.00MILLIMETER
Adjusts the position of a whole print image in
the direction the paper runs, that is vertically,
in 0.25 mm increments.
Any parts of the print image that are outside
the printable area as a result of this shift will
be cropped.
ITEM SETTINGS EXPLANATION

Oki c332 Specifications

General

Print Technology	LED
Monthly Duty Cycle	45, 000 pages
Standard Input Capacity	250 sheets
Maximum Input Capacity	880 sheets
Operating Systems Supported	Windows, Mac OS, Linux
Weight	22 kg
Interface	USB 2.0, Ethernet