C6100 Series User’s Guide
17
Macintosh OS 10.2 and 10.3
1. Open the file you want to print.
2. Click File → Print.
3. Open the drop-down list below Presets. Select Printer
Option.
4. At Media Weight, make your selection.
See “Driver Settings” on page 11.
See “Face up / Straight through / Rear Exit” on page 14.
5. Change any other settings as desired.
6. Click Print.
CAUTION!
1. If type and weight are not correctly set,
• print quality deteriorates
• the fuser roller may be damaged.
2. If the settings in the printer differ from those selected on
your computer, the printer does not print.
An error message displays.
3. The following printer settings are given as a guide only.
Some software applications require the paper feed, size and
media settings to be selected from within the application
(page setup).
To Next Page
Loading...
Need help?
General
