Oki C6100 Series - Click OK

C6100 Series User’s Guide
289
Windows PostScript
This feature is not available in this operating system
Windows PCL
For more information, see “General Information” on page
288.
1. Open the file you want to print.
2. Click File → Print.
3. Select your printer.
4. Click Properties (or Setup, or your application’s
equivalent).
5. Click the Setup tab. Under Finishing Mode, select Poster
Print.
6. Click Options. Adjust the configuration details.
7. Click OK.
8. The Setup tab screen appears.
9. Change any other settings as desired.
10. Click OK.
11. The main Print screen appears.
12. Change any other settings as desired.
13. Click OK.
14. The document prints.