C6100 Series User’s Guide
175
Windows
PostScript
For important information about printing banners, see General
Information, on page 174.
Before you print a banner, you must set Multi Purpose Tray is
Manual feed to ON in the printer driver. The default is OFF.
The printer operator panel will prompt you to load the media
before the job prints.
1. Open the file you want to print.
2. Click File → Print.
3. Select your printer.
4. Click Properties.
5. Click the Paper Quality tab.
6. Click Advanced.
7. Below Document Options, below Printer Features, at
“Multipurpose tray is handled as manual feed”, make
your selection. Choices are Yes or No.
8. Change any other settings as desired.
9. Click OK.
10. The Paper Quality tab screen appears.
11. Change any other settings as desired.
12. Click OK.
13. The main Print screen appears.
14. Change any other settings as desired.
15. Click OK.
16. The document prints.
To Next Page
Loading...
Need help?
General
