Oki C6100 Series - Page 177

C6100 Series User’s Guide
177
Macintosh
OS 10.2 and 10.3
For important information about printing banners, see General
Information, on page 174.
Before you print a banner, you must set Multi Purpose Tray is
Manual feed to ON in the printer driver. The default is OFF.
The printer operator panel will prompt you to load the media
before the job prints.
1. Open the file you want to print.
2. Click File → Print.
3. Open the drop-down list below Presets. Select Printer
Option.
4. Select “Multi Purpose Tray is Manual feed”.
If the box has a check mark, the feature is ON.
If the box is empty, the feature is OFF.
5. Change any other settings as desired.
6. Click Print.