C6100 Series User’s Guide
274
Windows PostScript: Single Job
For more information,
Paper Types: see page 269
Paper Weights: see page 269
Paper Sizes: see page 270
Long Edge vs. Short Edge: see page 270
Duplexing Restrictions: see page 271
To change the settings for only one print job:
1. Open the file you want to print.
2. Click File → Print.
3. Select your printer.
4. Click Properties (or Setup, or your application’s
equivalent).
5. Next:
Windows XP: Click the Layout tab.
Windows 2000: Go to the next step.
Windows Me/98: Click the Setup tab.
Windows NT: Click the Advanced tab. Under Document
Options, Layout, go to the next step.
6. Next:
Windows XP, 2000: Click Print on Both Sides
Windows Me/98/NT: 2-Sided Printing.
7. Select
Windows XP, 2000: Flip on Long Edge or Flip on Short
Edge.
Windows Me/98/NT: Long Edge Binding or Short Edge
Binding.
See “Long Edge vs. Short Edge” on page 270.
8. Change any other settings as desired.
9. Click OK.
To Next Page
Loading...
Need help?
General
