- 34 -
Connecting to a Computer
1
1. Setup
Next, install the printer driver on the
computer.
1 Ensure that your printer and the
computer are turned on and connected,
and then insert the “Software DVD-ROM”
into the computer.
Reference
● “Connecting an Ethernet Cable” P.31
2 Click [Run Setup.exe] after
[Auto Play] is displayed.
If the [User Account Control] dialog box
appears, click [Yes].
3 Select the language, and then click
[Next].
4 Select [C822], and then click [Next].
5 Read the license agreement and then
click [I Agree].
6 Read the [Environmental advice for
Users] and then click [Next].
7 Select a check box for the driver
to install from [PCL driver] under
[Software].
Memo
● To batch install software, select check boxes of
software to be installed.
To install software separately, click the install
button on the right side of each item, and follow the
instructions displayed on a screen.
8 Click the batch install button on the top.
9 If the [Windows Security] dialog box
appears, click [Install this driver
software anyway].
To Next Page
Loading...
