- 35 -
Connecting to a Computer
1
1. Setup
10 Click [Network].
The device search starts.
- If the printer is detected, the software is
automatically installed. Proceed to step
12.
- If the printer is not detected, the [Check
for the installed devices] screen is
displayed. Proceed to step 11.
11 Click [Restart search] to restart the
device search.
After the printer is displayed, select the printer
and click [Next].
Memo
● If the printer is not displayed by clicking [Restart
search], select [IP address] and enter the IP
address assigned to your printer, and then click
[Next].
12 If the [Windows Security] dialog box
appears, click [Install this driver
software anyway].
13 Click [Exit] to complete the installation.
Note
● If the dialog box prompting to restart the computer
appears, click [Yes]. The computer automatically
restarts.
Reference
● For how to congure the tray settings by the driver,
refer to “When Adding Options” P.52.
14 Click [Start] > [Devices and Printers].
15 Check that the [OKI C822] icon is
displayed.
Right-click the [OKI C822] icon and select one of
the menu items, and then check that the printer
drivers installed are displayed in the submenu.
16 Remove the “Software DVD-ROM” from
the computer.
Finish by test printing from a computer.
1 Open a printer driver property.
2 Click Test Print.
The installation is complete.
If installing the options such as an
additional tray unit or the SD memory
card kit, specify the settings with a printer
driver. Refer to “When Adding Options”
P.52
To Next Page
Loading...
