Oki C822n - Page 43

- 43 -
Connecting to a Computer
1
1. Setup
 Next, enable the sleep mode on the
printer.
Note
● If using the Bonjour, disable the sleep mode.
1 Press the <ENTER> button on the
operator panel.
2 Press the scroll button several times
to select [Admin Setup], and then
press the <ENTER> button.
䎩䏘䏑䏆䏗䏌䏒䏑䏖䎃䎃䎃䎃䎃䎃䎕䎒䎕
䫹 䎦䏄䏏䏌䏅䏕䏄䏗䏌䏒䏑
䎤䏇䏐䏌䏑䎃䎶䏈䏗䏘䏓
3 Enter the administrator password, using
the numeric (0-9) keys.
The factory default password is “aaaaaa”. Press
<ENTER> button after each character you input.
䎨䏑䏗䏈䏕䎃䎳䏄䏖䏖䏚䏒䏕䏇
䯴䎙䎐䎔䎕䏇䏌䏊䏌䏗䏖䎌
4 Press the <ENTER> button.
5 Press the scroll button several times
to select [Power Setup], and press the
<ENTER> button.
䎤䏇䏐䏌䏑䎃䎶䏈䏗䏘䏓䎃䎃 䎃䎃䎃 䎖䎒䎗
䎶䏜䏖䏗䏈䏐䎃䎶䏈䏗䏘䏓
䎥䏘䏝䏝䏈䏕䎃䎶䏈䏗䏘䏓
䎳䏒䏚䏈䏕䎃䎶䏈䏗䏘䏓
䎰䏈䏐䏒䏕䏜䎃䎶䏈䏗䏘䏓
6 Press the scroll button to select
[Sleep], and press the <ENTER>
button.
䎳䏒䏚䏈䏕䎃䎶䏈䏗䏘䏓䎃䎃䎃䎔䎒䎔
䎶䏏䏈䏈䏓
䎤䏘䏗䏒䎃䎳䏒䏚䏈䏕䎃䎲䏉䏉
䎳䏒䏚䏈䏕䎃䎶䏄䏙䏈
7 Press the scroll button to select
[Enable], and press the <ENTER>
button.
䎶䏏䏈䏈䏓䎃䎃䎃䎃䎃䎃䎃䎃䎃䎔䎒䎔
䎧䏌䏖䏄䏅䏏䏈
䎍䎃 䎃 䎨䏑䏄䏅䏏䏈
8 Press the <ON LINE> button to exit the
menu mode.