- 44 -
Connecting to a Computer
1
1. Setup
Finish by test printing from a computer.
1 Start up [TextEdit].
2 Open an appropriate le.
3 Start printing.
The installation is complete.
If installing the options such as an
additional tray unit, specify the settings
with a printer driver. Refer to “When
Adding Options” P.52
Using Bonjour (Rendezvous)
(for Mac OS X 10.3.9 to 10.4.11)
When connecting to the network with Bonjour,
it is necessary to disable the sleep mode in the
printer. After doing that, install the driver on
the computer and set the printer as a network
printer.
Memo
● The following procedure uses Mac OS X 10.4.11 as an
example. Depending on an OS, the description may be
different.
First, disable the sleep mode on the
printer.
1 Press the <ENTER> button on the
operator panel.
2 Press the scroll button several times
to select [Admin Setup], and press the
<ENTER> button.
䎩䏘䏑䏆䏗䏌䏒䏑䏖䎃䎃䎃䎃䎃䎃䎕䎒䎕
䫹
䎦䏄䏏䏌䏅䏕䏄䏗䏌䏒䏑
䎤䏇䏐䏌䏑䎃䎶䏈䏗䏘䏓
3 Enter the administrator password.
The factory default password is “aaaaaa”. Press
<ENTER> button after each character you input.
䎨䏑䏗䏈䏕䎃䎳䏄䏖䏖䏚䏒䏕䏇
䯴䎙䎐䎔䎕䏇䏌䏊䏌䏗䏖䎌
4 Press the <ENTER> button.
To Next Page
Loading...
