Oki C822n - Page 45

- 45 -
Connecting to a Computer
1
1. Setup
5 Press the scroll button several times
to select [Power Setup], and press the
<ENTER> button.
䎤䏇䏐䏌䏑䎃䎶䏈䏗䏘䏓䎃䎃 䎃䎃䎃 䎖䎒䎗
䎶䏜䏖䏗䏈䏐䎃䎶䏈䏗䏘䏓
䎥䏘䏝䏝䏈䏕䎃䎶䏈䏗䏘䏓
䎳䏒䏚䏈䏕䎃䎶䏈䏗䏘䏓
䎰䏈䏐䏒䏕䏜䎃䎶䏈䏗䏘䏓
6 Press the scroll button to select
[Sleep], and press the <ENTER>
button.
䎳䏒䏚䏈䏕䎃䎶䏈䏗䏘䏓䎃䎃䎃䎔䎒䎔
䎶䏏䏈䏈䏓
䎤䏘䏗䏒䎃䎳䏒䏚䏈䏕䎃䎲䏉䏉
䎳䏒䏚䏈䏕䎃䎶䏄䏙䏈
7 Press the scroll button to select
[Disable], and press the <ENTER>
button.
䎶䏏䏈䏈䏓䎃䎃䎃䎃䎃䎃䎃䎃䎃䎔䎒䎔
䎨䏑䏄䏅䏏䏈
䎍䎃 䎃 䎧䏌䏖䏄䏅䏏䏈
8 Press the <ON LINE> button to exit the
menu mode.
 Then, install the printer driver on the
computer.
1 Ensure that your printer and the
computer are turned on and connected.
Reference
● “Connecting an Ethernet Cable” P.31
2 From the Apple menu, select [System
Preferences].
3 Select [Network].
4 Select [Network Port Congurations]
from [Show], and then check that
[Built-in Ethernet] is selected.
5 Close [Network].
6 Insert “Software DVD-ROM” into the
computer.
7 Double-click the [OKI] icon on the
desktop.
8 Double-click [Driver] folder > [Printer]
folder [Installer for Mac OSX].
9 Enter the administrator’s password, and
then click [OK].
Follow the instructions displayed on the screen to
complete the installation.
10 From the [Go] menu, select [Utilities]
and then double-click [Printer Setup
Utility].
Note
● If [Printer Setup Utility] is already running, close it
and open it again.
11 Click [Add].
If the [You have no printers available] dialog
box appears, click [Add].