Oki C910n User Manual

Appendix B – menu system > 71
S YSTEM
C ONFIGURATION EXAMPLE – MONOCHROME PAGES PRINTED
To display the total monochrome pages printed so far (remembering that a duplex page
counts as two pages):
1. Ensure that the LCD panel indicates that the printer is ready to print.
2. Enter menu mode by pressing either the Up-arrow or Down-arrow button and
press them repeatedly as required until the CONFIGURATION MENU is highlighted.
3. Press the Enter button to select this menu.
4. Press the Up-arrow or Down-arrow buttons repeatedly until PRINT PAGE COUNT is
highlighted.
5. Press the Enter button to select this Item.
6. Press the Up-arrow or Down-arrow buttons repeatedly until MONOCHROME PAGE is
highlighted.
7. Press the Enter button and the monochrome page count is displayed.
8. Press the Online button to exit menu mode and return to the ready to print status.
ITEM VALUE DESCRIPTION
Serial Number xxxxxxxxxxxxxxx Displays serial no. of the
printer.
Asset Number xxxxxxx Displays Asset Number.
Asset Number is 8
alphanumeric characters
that can be assigned by a
user. Same as Asset
Number of Menu Map.
CU Version xx.xx Displays version no. of CU
(Control Unit) firmware.
Same as CU version of
Menu Map.
PU Version xx.xx.xx Displays version no. of PU
(Print Unit) firmware.
Same as PU version of
Menu Map.
Total Memory xx MB Displays total RAM memory
installed in the printer.
Same as Total Memory of
Menu Map.
Flash Memory xx MB [Fxx] Displays total flash
memory installed in the
printer and version.
Same as Flash Memory of
Menu Map.
HDD xx.xx GB [Fxx] Displays size of hard disk
and file system version.
Same as HDD of Menu
Map.

Oki C910n Specifications

General

Brand	Oki
Model	C910n
Category	Printer
Language	English