Appendix B – menu system > 74
M
ENUS
T
RAY
CONFIGURATION
ITEM VALUE DESCRIPTION
Paper Feed Tray1
Tray2
Tray3
Tray4
Tray5
MP Tray
Specifies a feed tray.
Indicated only when Tray2–
5 implemented.
Auto Tray Switch ON
OFF
Sets the automatic tray
switch function.
Tray Sequence Down
Up
Paper feed tray
Specifies selection order
priority for automatic tray
selection/automatic tray
switch.
Unit of Measure Inch (L)
mm (A)
Specifies units for custom
paper size.
Traym Config,
where m is in
range 1 to 5
(similar
arrangement for
all trays)
Paper Size CassetteSize
Custom
Sets paper in Traym.
X Dimension 3.9 – 8.3 (A) – 8.5
(L) – 12.9 inch
100 – 210 (A) –
216 (L) – 328 mm
Sets Custom paper width for
Traym. Sets for the direction
perpendicular to the
direction of paper
movement.
Y Dimension 5.8 – 11 (L) –
11.7 (A) – 18 inch
148 – 279 (L) –
297 (A) – 457 mm
Sets Custom paper length
for Traym. Sets for the same
direction as paper
movement.
To Next Page
Loading...
