Appendix B – menu system > 78
Auto Continue ON
OFF
Sets whether the printer is
automatically recovered
when Memory Overflow or
Tray Request occurs.
Manual Timeout OFF
30 sec
60 sec
If paper is not fed within
this time in manual feed,
the job is cancelled.
Wait Timeout OFF
5 sec
10 sec
20 sec
30 sec
40 sec
50 sec
60 sec
90 sec
120 sec
150 sec
180 sec
210 sec
240 sec
270 sec
300 sec
Sets the time period
between stopping receipt
of job data and forced
print.
For PS, printing is not
carried out and the job is
cancelled.
Low Toner Continue
Stop
Sets the printing operation
when insufficient toner is
detected.
Continue: the printer can
continue printing while
remaining online.
Stop: the printer stops
printing and goes offline.
Jam Recovery ON
OFF
ON: continues printing the
job, including any jammed
pages, once the jam has
been cleared.
OFF: Cancels a job
including the page
currently jammed.
Error Report ON
OFF
ON: prints an error report
during the occurrence of
an internal error. This item
is valid only for PS and
PCLXL.
Print Position
Adjust
X Adjust 0.00
+0.25 – +2.00
-2.00 – -0.25 mm
0.00
+0.01 – +0.08
-0.08 – -0.01 in
Adjusts the position of the
whole printing image (0.25
mm, 0.01 in interval)
perpendicular to the
direction of paper
movement (i.e.
horizontally).
Y Adjust 0.00
+0.25 – +2.00
-2.00 – -0.25 mm
0.00
+0.01 – +0.08
-0.08 – -0.01 in
Adjusts the position of the
whole printing image (0.25
mm, 0.01 in interval)
parallel to the direction of
paper movement (i.e.
vertically).
ITEM VALUE DESCRIPTION
To Next Page
Loading...
Need help?
General
