Oki C931 User Manual

- 221 -
5
1
2
4
3
Convenient print
functions
Appendix Index
Checking and
Changing Printer
Settings Using
the Control Panel
Network
Setup
Matching
Colors
Using Utility
Software
Network setting items

Security
Item
Factory
Default
Settings
Explanation
Web Page
Conguration
Tool/ Network
Setting Plug-in
Network
Card Setup
Utility
(Mac OS X)
NetBIOS over
TCP
- - Enable Species whether to use NetBIOS over TCP.
EtherTalk - - Disable Species whether to use EtherTalk.
Web (port No.:
80)
Device setup
(web) -
Enabled
Web setup Enable Species whether to access the device using web
pages.
Web - - 80 Species the port number to access the device
web page.
IPP (port No.:
631)
- - Disable Species whether to use IPP.
Telnet - - Disable Species whether to access the device using
Telnet.
FTP - - Disable Species whether to access the device using FTP.
SNMP - - Enable Species whether to access the device using
SNMP.
POP - - Disable Species whether to use POP3.
POP - - 110 Species the port number of POP3.
SNTP - - Disable Species whether to use SNTP.
Local Ports - - Enable Species whether to use specic protocols.
SMTP sending - - 25 Species the SMTP send port number.
Network
functions
Change
password
Change
password
Change
password
(Last 6 digits
of MAC
address)
Sets a new administrator password using 15
single-byte characters max. The password
is case-sensitive. This password is used only
when changing the setup from the utilities. The
administrator password set using the device
cannot be changed from this item.

IP ltering
Item
Factory
Default
Settings
Explanation
Web Page
Conguration
Tool/ Network
Setting Plug-in
Network
Card Setup
Utility
(Mac OS X)
IP ltering - - Disable Species whether to use IP ltering. Make
sure to make the following category settings if
enabling IP ltering. Unless these settings are
made, the device cannot be accessed via TCP/IP.
Start address
1 to 10
- - 0.0.0.0 Species the IP address authorized by access to
the device. You can specify individual addresses
or the address range.
End address
1 to 10
- - 0.0.0.0
Print 1 to 10 - - Disable Species whether to authorize print jobs from
the specied IP address.
Setup 1 to 10 - - Disable Species whether to authorize setup changes
from the specied IP address.
IP address of
the registered
administrator
- - 0.0.0.0
Automatically species the administrator IP address.
Normally only this address can access the device.
All accesses are authorized via proxy servers if the
administrator accesses the server via a proxy server.

Oki C931 Specifications

General

Print Technology	LED
Print Resolution	1200 x 1200 dpi
Print Speed Black	50 ppm
Print Speed Color	50 ppm
Monthly Duty Cycle	300, 000 pages
Duplex Printing	Yes
Operating Systems Supported	Windows, Mac OS, Linux
Connectivity	Ethernet
Paper Capacity	530 sheets (standard tray)