Oki C931 User Manual

- 261 -
5
1
2
4
3
Convenient print
functions
Appendix Index
Checking and
Changing Printer
Settings Using
the Control Panel
Network
Setup
Matching
Colors
Using Utility
Software
Setting the network from the web browser
13
Enter the CA certicate le name, and
click [OK].
Memo
z
The imported CA certicate is the authenticator
certicate issued by the RADIUS server certicate.
z
Importable le formats are PEM, DER, and PKCS#7
formats.
The CA certicate will be imported to the
device.
14
Click [Submit].
15
The settings will be save in the printer,
and the network functions will restart.
If the standby screen is displayed in the
control panel, turn OFF the device power
supply.
Reference
z
For how to turn OFF the power supply, see "Basic".
z
Go to “Connecting the device to the authentication
switch” (P.261).

Connecting the device to the
authentication switch
Memo
z
Check that the device power supply is turned OFF.
1
Insert the LAN cable into the device
LAN (network) interface connector.
2
Insert the LAN cable into the
authentication switch authentication
port.
3
Turn ON the device power supply.
4
Check that the standby screen is
displayed in the control panel.
5
Set the device IP address according to
the environment in use.

Oki C931 Specifications

General

Print Technology	LED
Print Resolution	1200 x 1200 dpi
Print Speed Black	50 ppm
Print Speed Color	50 ppm
Monthly Duty Cycle	300, 000 pages
Duplex Printing	Yes
Operating Systems Supported	Windows, Mac OS, Linux
Connectivity	Ethernet
Paper Capacity	530 sheets (standard tray)