1
2
3
5
4
Convenient print
functions
Appendix Index
Checking and
Changing Printer
Settings Using
the Control Panel
Network
Setup
Matching
Colors
Using Utility
Software
- 297 -
Table of setting items in the device setup screen
z
Shaded areas are factory-set values.
Item Details
BG Setting Cyan 0
+1
+2
+3
-3
-2
-1
With cyan, compensates for print results variation
due to differences in the temperature and
humidity environments, print density, and print
frequency. Change the setting if the underlay is
dark.
Magenta
0
+1
+2
+3
-3
-2
-1
With magenta, compensates for print results
variation due to differences in the temperature
and humidity environments, print density,
and print frequency. Change the setting if the
underlay is dark.
Yellow
0
+1
+2
+3
-3
-2
-1
With yellow, compensates for print results
variation due to differences in the temperature
and humidity environments, print density,
and print frequency. Change the setting if the
underlay is dark.
Black
0
+1
+2
+3
-3
-2
-1
With black, compensates for print results variation
due to differences in the temperature and
humidity environments, print density, and print
frequency. Change the setting if the underlay is
dark.
White
*1
*1: Displayed when
[Admin Setup] >
[Spot Color] is set
to [White] on the
control panel for
C941.
0
+1
+2
+3
-3
-2
-1
With white, compensates for print results
variation due to differences in the temperature
and humidity environments, print density,
and print frequency. Change the setting if the
underlay is dark.
Clear
*1
*1: Displayed when
[Admin Setup] >
[Spot Color] is set to
[Clear] on the control
panel for C941.
0
+1
+2
+3
-3
-2
-1
With clear, compensates for print results variation
due to differences in the temperature and
humidity environments, print density, and print
frequency. Change the setting if the underlay is
dark.
Drum Cleaning
On
Off
Sets whether to implement drum cleaning before
printing. The image quality may be improved.
Transfer Roller Cleaning Execute Implements cleaning of the transfer roller unit.
High Humid Mode
Mode1
Mode2
Off
Set if the paper curl after printing is conspicuous.
Try mode 2 if reduced paper curl effects are not
obtained after settings mode 1.
Setting mode 1 or mode 2 will increase the warm-
up time and reduce the print speed.
Moisture Control
On
Off
Sets whether or not to implement condensation
control.
If [On], completing the printing of 1 page may
take time.
Narrow Paper Speed
Normal
Slow
Sets the speed when printing on narrow paper.
To Next Page
Loading...
Need help?
General
