Replacing Consumables / Maintenance Units
- 57 -
Replace the Print Cartridge
1
Insert your finger into the recess on the 
right side of the printer and pull the front 
cover open lever to open the front cover 
forward.
Memo
• Open the front cover gently. If you open it rapidly, the 
MP Tray may open.
2
Remove the print cartridge.
Note
• When toner powder adheres to the paper feeding area 
inside the printer, wipe it off with a wet cloth that has 
been well wrung.
3
Take out the new print cartridge from its 
bag and remove the desiccant attached to 
it.
4
Place a new print cartridge into the printer.
5
Turn the blue lever of the print cartridge 
fully in the direction of the arrow while 
pressing the top of the print cartridge.
6
Close the front cover.
Note
• The front cover cannot be closed completely if the top 
cover is not closed.
7
Please recycle used print cartridges.
Memo
• If you must dispose of a toner cartridge, put it in a 
plastic bag or similar container and dispose of it in 
accordance with your municipality's ordinances or 
guidelines.
Front cover 
Front cover 
open lever
Print cartridge
Blue lever