Operator panel > 13
7. Ready indicator (green). ON indicates ready to receive data. FLASHING
indicates processing data. FLASHING SLOWLY indicates the machine status is
sleep mode. OFF indicates Offline.
8. Attention indicator (red). ON indicates a warning (e.g. low toner). FLASHING
indicates an error, (e.g. toner empty). OFF indicates normal condition.
C
HANGING
LANGUAGE
The default language used by your printer for display messages and for report printing is
English. If required, this can be changed to:
P
OWER
SAVING
MODE
If you do not use the machine for a while, it will enter the power saving mode to control
the power consumption of the device. To cancel power saving mode, press the On Line
button on the control panel.
S
WITCHING
OFF
1. Press the Enter button on the control panel to enter the menu.
2. Press the Menu down button and scroll to the SHUTDOWN MENU.
3. Press the Enter button.
4. Press the Enter button to execute.
5. At the prompt, turn the power switch OFF.
NOTE
If both the Ready and Attention indicators are flashing, there is a minor error
with the printer, for example, toner is low and the image drum needs to be
changed.
German Danish Swedish Polish
French Dutch Russian Greek
Italian Turkish Finnish Czech
Spanish Portuguese Hungarian Norwegian
NOTE
1. The Operator Panel Language Setup Wizard will run automatically when
you install the printer driver. Follow the instructions provided by this
utility to set your chosen language.
2. The list above is neither conclusive nor exhaustive.
CAUTION!
If you have an SD card fitted, always follow the correct shutdown
procedure to ensure that no data is lost.
NOTE
Alternatively, pressing the Back button for longer than 4 seconds will display
the
SHUTDOWN MENU.
To Next Page
Loading...
