Maintenance > 60
8. Push the coloured lever towards the rear of the printer (lock position) to release
toner into the image drum unit.
9. Gently wipe the LED head surface with a clean, lint free cloth.
10. Close the top cover and press it down to latch it closed.
C
LEANING
...
THE
UNIT
CASING
1. Switch the printer off.
2. Wipe the unit surface with a soft cloth moistened sparingly with water or neutral
detergent.
3. Use a soft dry cloth to dry the unit surface.
4. Switch the printer on.
CAUTION!
Use a clean, moist, lint-free cloth for cleaning. Do not use benzine,
thinners or alcohol as a cleaning agent.
To Next Page
Loading...
