Menu functions > 18
P
RINT
MENU
This menu provides adjustment of various print job related functions.
ITEM DEFAULT REMARKS
COPIES 1 Enter the number of copies of a document to be
printed from 1 to 999.
DUPLEX OFF Switches the Duplex (2 sided) function ON/OFF.
Duplex must be fitted.
BINDING LONG EDGE Sets the default binding to SEF or LEF.Display
condition: duplex setting is enabled.
See “DUPLEX” on page 18.
PAPER FEED TRAY1 Selects the default tray for paper feed, Tray 1
(upper), Tray 2 (lower, if installed) or MP Tray (multi
purpose tray).
AUTO TRAY SWITCH ON If two trays contain identical paper, the printer can
switch to an alternative source when the current tray
runs out in the middle of a print job.
TRAY SEQUENCE DOWN Determines tray sequence order when automatically
switching.
MP TRAY USAGE DO NOT USE If a document to be printed demands a paper size not
installed in the selected tray, the printer can
automatically feed from the multi purpose tray
instead. If this function is not enabled, the printer will
stop and request the correct size of paper to be
loaded.
MEDIA CHECK ENABLE Determines whether the printer check the size of
paper loaded matches that required for the document
sent to print.
RESOLUTION 600DPI Sets the default resolution for printing (dots per inch).
1200DPI uses more memory and requires more time
to process, but prints at a higher quality.
TONER SAVE MODE DISABLE Use less toner 10pt characters print legibly, but 8 pt
characters do not.
ORIENTATION PORTRAIT Selects default page orientation between portrait
(tall) and landscape (wide). - (PCL, IBMPPR & EPSON
FX only)
LINES PER PAGE 64LINES Sets the number of lines of text per page when raw
text is received from systems other than Windows.
The default for A4 portrait is 64, and for Letter is 60. -
(PCL only)
EDIT SIZE CASSETTE SIZE Sets the size of the printable page area to match the
size of paper in use. This is not the same as the
physical paper size, which is always slightly larger.
For dimensions of physical page sizes, see “Paper
recommendations” section in this guide.
X SIZE 210MILLIMETER Specifies paper width of Custom paper as a default
value.
Sets a paper size at right angles to the paper run
direction.
Y SIZE 297MILLIMETER Specifies paper length of Custom paper as a default
value.
Sets a paper size in the same direction as the paper
run direction.
To Next Page
Loading...
