Menu functions > 20
S
YS
CONFIG
MENU
This menu adjusts general printer settings to suit the way you prefer to work.
MPT PAPERSIZE A4 LEF Selects the size of paper to be fed from the multi
purpose tray. For CUSTOM setting see X-
DIMENSION and Y-DIMENSION in “Print menu” on
page43.
MPT MEDIATYPE PLAIN Selects the type of media to be fed from the multi
purpose tray so that the printer can adjust its
internal parameters to better accommodate the
selected type of media.Note: USERTYPEn are
displayed only if registered in the host PC/Server.
MPT MEDIAWEIGHT MEDIUM Selects the media weight to be fed from the multi
purpose tray.
UNIT OF MEASURE MILLIMETER Selects the unit of measure.
ITEM DEFAULT REMARKS
POW SAVE TIME 1 MIN Adjusts the idling time before the printer
automatically switches into power saving mode. In
this mode power consumption is reduced to a low
level required to just keep the printer operating and
ready to receive data. When a job is sent the printer
will require a warm-up time of up to 1 minute before
printing can begin.
SLEEP TIME 10 MIN Adjusts the power saving time before the printer
automatically switches into sleep mode.
PERSONALITY AUTO EMULATION This item selects which industry standard emulation
your printer should use. When set to AUTO, incoming
data is examined and the correct emulation is
automatically selected each time a print job is
received.
PARA PS-PROTOCOL ASCII Selects PostScript data format for parallel port.
USB PS-PROTOCOL RAW Selects PostScript data format for USB port.
NET PS-PROTOCOL RAW Selects PostScript data format for network port.
CLRABLE WARNING ONLINE When ONLINE, non-critical warnings, such as
requests for a different paper size, can be cleared by
pressing the ON LINE button. When set to JOB, they
are cleared when the print job resumes.
AUTO CONTINUE OFF Determines whether or not the printer will
automatically recover from a memory overflow
condition.
MANUAL TIMEOUT 60 SEC Specifies how many seconds the printer will wait for
paper to be fed before cancelling the job.
WAIT TIMEOUT 40 SEC Specifies how many seconds the printer will wait
when received data pauses before forcing a page
eject. In PostScript Emulation mode the job will be
cancelled if timeout occurs.
TIMEOUT LOCAL 40 SEC
TIMEOUT NET 90 SEC
ITEM DEFAULT REMARKS
To Next Page
Loading...
